Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2211004.png)
-
Remove plastic cap -1- from solenoid.
-
Remove nut at solenoid terminal 30 and remove cable -1-.
-
Disconnect electrical connection at starter terminal 50 -2-.
-
Remove bolts -1- and -2-.
-
Lift starter up and out from transmission.
Installing
Install in reverse order of removal, noting the following:
-
Install and torque all starter bolts and terminal nuts to values specified in table.
-
When reconnecting battery, torque terminal nuts to values specified in table.