Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Reservoir, disassembling and assembling
1 - Cap with dip stick
^
Oil level: between minimum and maximum marks; Engine temperature approximately 50°C
^
Arrow A: oil level with engine cold
^
With engine cold, oil level must not rise above Min. marking
^
Check oil level with cap screw on
^
Open cap with e.g. a bar
2 - Hose clamp
3 - Return hose
4 - Intake hose
5 - Internal hex head bolt, 10 Nm
6 - Reservoir
Securing pressure line and intake hose on vehicles with 1.4 ltr., 1.6 ltr., 1.9 ltr. SDI/TDI engines without an air conditioner
VR5 and VR6 with/without air conditioner