Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-2434001.png)
Steering Column Lock: Procedures
Ignition key removal lock, checking
-
Turn ignition key to "ignition on" position.
-
Press brake pedal.
It must be possible to move selector lever out of P position.
If this is not possible, the ignition key removal lock cable must be adjusted.
It must only be possible to remove the ignition key when selector lever is in P position!
When ignition key is in position "Ignition off" it must not be possible to move selector lever out of P position!
