Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Special tools, testers and auxiliary items required
^
Holding fixture VW 313
^
CV joint boot clamp tool V.A.G. 1275
^
Torque wrench V.A.G. 1332
^
Open jaw insert, 34 mm V.A.G 1332/5
^
Transmission support T10108
Removing
The tie rods can only be removed/installed with steering gear removed.
Removing and installing power steering gear go to Power steering gear, removing and installing
-
Seal line connections on power steering gear if not already done.
-
Clean outside of power steering gear in the area of the boot.
-
Open clamp and slide boot back.
-
Tighten power steering gear on transmission support T10108 and remove tie rod from connecting rod.