Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Steering Angle Sensor: Removal and Replacement
Steering angle sensor -G85-, removing and installing
Removing
-
Turn wheels to straight ahead position.
-
Removing airbag module and steering wheel.
-
Remove lower stowage compartment.
-
Take out covering in footwell.
-
Remove bolts -1-.
-
Take off handle for height and reach adjustment -5-.
-
Remove bolts -2-, -3- and -4-.
-
Take off lower steering column switch trim.
-
Take off upper steering column switch trim -1-.
The steering angle sensor -G85- is installed in a housing -1- together with the coil connector.