Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Stabilizer Bar: Service and Repair
Modified Mounting For Stabilizer Bar
Modified mounting for stabilizer bar
Affected vehicles:
^
Vehicles with all wheel drive
1 - Nut, 90 Nm
2 - Control arm
3 - Hex bolt, 15 Nm plus an additional 1/4 turn 90°
4 - Bracket
5 - Nut, 90 Nm
6 - Stabilizer bar
7 - Connecting Link
A - Upper threaded pin
-
Install ball joint with long thread - A - at top on spring plate.
B - Lower threaded pin
-
Install ball joint with short thread - B -, at bottom on stabilizer bar.