Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-1758001.png)
Torque Converter: Application and ID
Torque Converter, Identification
Torque converter, identification, 01M, 4 Spd. A/T
There are different types of torque converter.
Current torque converter with sleeve bearing in turbine shaft of transmission.
New torque converter with integrated needle bearing.
Identification is by means of the code letters.
The current torque converter may only be installed in the transmission with a sleeve bearing in the turbine shaft. It can be identified by the fourth
letter, which is a B, C, R, T or V.
Example (arrow) is a "C"
The new torque converter may only be installed in the transmission without a sleeve bearing in the turbine shaft. It can be identified by the fourth
letter, which is a D, H, or J.
Example (arrow) is a "D"
Note: If a new torque converter with integrated needle bearing is installed in a transmission with a sleeve bearing in the turbine shaft, the sleeve
bearing must be removed.
