Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
CAUTION! Do not run the engine or tow the vehicle with the oil pan removed or when there is no ATF in the transmission.
Note:
^
The valve body or the conductor strip can also be removed when the transmission is installed.
^
The conductor strip can be removed individually.
^
After re-installing the oil pan, fill with ATF.
^
Always replace a valve body which is faulty.
1 - Plug
^
Always replace seal go to Fig. 2
^
Checking ATF level and topping-up
2 - Overflow pipe
^
Remove to drain ATF go to Fig. 1
^
Screw in onto stop
^
Checking ATF level and topping-up
3 - Oil pan
4 - Bolt
^
12 Nm
5 - Magnet
^
Insert in recess in oil pan
6 - Spacer bushing
^
Press into gasket
7 - Gasket
^
Always replace
^
Press spacer bushings into gasket
8 - ATF screen
^
Installing go to Fig. 10