Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Installed position:
Arm (arrow) points toward master cylinder -B-.
-
After installing clutch master cylinder, bleed clutch system.
Clutch System, Bleeding
Clutch system, bleeding, 02M, 5 and 6 Spd. M/T
Special tools and equipment
^
VAS 5234 brake filler and bleeder unit for brakes
Brake fluid specification:
Note: Prefilling the system is not necessary!
-
Connect VAS 5234 brake filler and bleeder unit.
Note: If necessary, use bleed hose V.A. G 1238IB3 - 670 mm long - to bleed the system.
-
Connect bleed hose to brake bleeding appliance collector bottle.
-
Connect bleed hose -A- to bleeder (arrow) and open bleeder valve.
-
Pressurize system to 2 bar
-
Open bleeder valve
-
Bleed off about 100 cm3 brake fluid.
-
Rapidly operate pedal from stop to stop 10 to 15 times.
-
Bleed off an additional 50 cm3 brake fluid.
-
Close bleeder valve.
-
Depress clutch pedal several times after completion of bleeding process.