Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Clutch Release Bearing: Service and Repair
02J, 5 SPD. M/T
Clutch release mechanism, servicing, 02J, 5 Spd. M/T
1 - Transmission
2 - Ball stud, 25 Nm
^
Lubricate with MoS2 grease
3 - Input shaft oil seal
4 - Guide sleeve
^
With vulcanized O-ring
^
If damaged replace guide sleeve and O-ring together
^
Lubricate guide sleeve in area of release bearing with MoS2 grease
5 - Retaining spring
^
Secure to clutch release lever
6 - Securing bolt, 20 Nm
7 - Clutch release lever
8 - Release bearing
^
Do not wash out bearing, only wipe
^
Replace noisy bearings
^
Lubricate surfaces which contact release lever with MoS2 grease
9 - Securing bolt, 20 Nm
10 - Slave cylinder
11 - Plunger
^
Grease end of plunger with MoS2 grease