Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-3812002.png)
Extended hose length should be equal to measured amount of damaged hose previously removed, minus the ¾ of an inch section of hose for the adapter
to be installed.
When damaged hose section is shorter than 3/4 inch, a total of 3/4 inch must be cut, preferable on the lower end of the damaged hose to compensate for
adapter to be installed.
^
Trim and remove damaged sections of hose.
^
Carefully warm end of upper hose -1- (with special tool VAS 1978/14).
^
Insert repair adapter 1J0955875R -2- into hose -1- in arrow -A- direction.
^
Carefully warm end of lower hose -4-.
^
Insert repair adapter 1J0955875P -3- into hose -4- in arrow -B- direction.
^
Trim shrink tubing sections so that corrugated hose is covered a length of 5/8 of an inch, see distance -X-.
^
Slide shrink tubing over corrugated hoses, attach adapters together and secure repair with shrink tubing.
^
Reinstall hose and heated nozzles harness (if equipped) in plastic guide on hood hinge.
