Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
/Page-3839001.png)
Wiper Arm: Service and Repair
Windshield Wiper Arms, Removing And Installing
Removing
Wiper arms, removing.
Installing
NOTE: Wiper arm nuts -1- must be only be torqued after the wiper blade park position is adjusted properly.
-
Switch ignition on and briefly turn wipers on and off (wipers must come to a complete stop)
-
Switch off ignition and remove ignition key.
-
Mount wiper arms to wiper shaft and loosely install nuts -1- (do not tighten).
-
Adjust wiper blade park position.
-
Reinstall cover caps.
