Jetta Sedan L4-1.9L DSL Turbo (BEW) (2005)
Wiper Blade: Service and Repair
"Aero-Wiper" Blades, Removing and Installing
"Aero-Wiper" Blades, Removing And Installing
"Aero-wiper" system installed as a running change during m.y. 2002.
Removing
CAUTION:
-
To ensure proper wiper performance, only grab/lift Aero-wiper blades at the mounting pivot on wiper arm when removing and installing.
-
Driver and passenger wiper blades are different lengths. Damage will result if wiper blades are interchanged.
-
Bring wiper arm to park position.
-
Switch off all electrical consumers, switch off ignition and remove ignition key.
-
Lift Aero-wiper blade/arm assembly from windshield, noting CAUTION above.
-
Tilt wiper blade -1 on mounting pivot in direction of -arrow A- until it reaches stop.
-
Detach wiper blade from mounting pivot in direction of -arrow B-.
Installing
-
Insert wiper blade onto wiper arm mounting pivot -arrows-.
-
Engage blade by tilting on pivot until blade is parallel with arm.
-
Return arm/blade assembly to windshield, noting CAUTION above.