Jetta Sedan L4-2.0L (AVH) (2003)
-
Checking operation of the ignition key withdrawal lock.
40. Circlip
-
Always replace
-
For mounting selector lever cable to selector lever housing
-
Install with angled end inside selector housing
41. Gasket
-
Always replace
42. Selector lever cable
-
Do not bend or kink
-
If the outer cable is damaged the selector lever cable must be renewed
-
Lightly grease ball socket and cable ends before installing
43. Lever
-
For selector shaft
44. Support bracket
-
For mounting selector lever cable or transmission
45. Circlip
-
Always replace