Jetta Sedan L4-2.0L (BBW) (2005)
/Page-1725031.png)
Note: When removing ensure that the surface of the cylinder is not damaged.
Installing
-
The surface of the piston and seal must only be cleaned with methylated spirits and then dried.
-
Thinly coat piston and seal with assembly paste G 052 150 A2 before inserting.
-
Insert oil seal in brake caliper housing.
-
Place protective seal with outer sealing lip on the piston.
-
Using wedge 3409, insert inner sealing lip into groove in cylinder.
Note: When doing this hold piston in front of caliper housing.
