Jetta Sedan L5-2.5L (BGP) (2005)
Brake Pedal Assy: Locations
Brake pedal, assembly overview
CAUTION! The brake pedal travel must not be restricted by additional floor coverings.
Grease all bearing areas with grease G 000 602 before assembling.
1 - Mounting bracket
2 - Self-locking hex nut, 25 Nm
^
Replace each time
3 - Brake light switch F
^
Includes Brake Pedal Switch F47
^
On vehicles from KW 50/05, Brake Light Switch F is located on brake master cylinder
^
Clip brake pedal at pressure rod of brake booster before installing brake light switch.
^
Lubricate tappet head with polycarbamide grease G 052 142 A2
4 - Hex head bolt
5 - Brake pedal
6 - Cover
7 - Ball socket
8 - Wheel hub support
^
For ball head of brake servo push rod
9 - Self-locking hex nut, 25 Nm
^
Replace each time