Jetta Sedan L5-2.5L (BGP) (2005)
Valve Cover: Service and Repair
Cylinder Head Cover
Cylinder Head Cover
Special tools, testers and auxiliary items required
‹› Torque wrench 5-50 Nm (VAG 1331)
Removing
-
Remove the engine cover with air filter. Refer to --> [ Engine Cover with Air Filter ] See: Tune-up and Engine Performance Checks/Air Cleaner
Housing/Service and Repair/Removal and Replacement/Engine Cover with Air Filter.
-
Disconnect the air hose for the crankshaft housing ventilation - arrow -.
-
Remove the connecting pipe - A -.
-
Remove the ignition coils - 1 through 5 -. Refer to --> [ Ignition Coils with Power Output Stages ] See: Powertrain Management/Ignition
System/Ignition Coil/Service and Repair/Removal and Replacement.
-
Remove the bolts for the cylinder head cover in reverse sequence - 16 to 1 -.
Installing
Install in reverse order of removal. When doing this note the following:
‹› Replace the cylinder head cover if damaged or leaking.