Jetta Sedan L5-2.5L (BGP) (2005)
‹› 1.4 bar, black.
‹› Checking, refer to --> [ Oil Pressure and Switch, Checking ] See: Engine Oil Pressure/Testing and Inspection.
5
From intake hose
6
Vent hose
‹› Due to a 4 point lock, only disconnect when the oil filter bracket is to be removed
7
Dust cap
8
Oil filter housing, 25 Nm
‹› Remove and install using the oil filter wrench (3417).
‹› Draining, refer to --> [ Oil Filter Housing, Draining ] See: Oil Filter Housing/Service and Repair.
9
Seal
‹› Always replace.
‹› Insert when lubricated.
‹› Installation position: Service flag upward.
10
Oil filter element
‹› Drain oil filter housing before removing, refer to --> [ Oil Filter Housing, Draining ] See: Oil Filter Housing/Service and Repair.
‹› Replacing.
11
Gasket
‹› Always replace.
12
Oil cooler
‹› See note, refer to --> [ General Repair Information ] See: Description and Operation/General Repair Information.
‹› Ensure sufficient clearance to surrounding components.
‹› Coolant hose connection diagram, refer to --> [ Coolant Hose Connection Diagram ] See: Cooling System/Diagrams.
13
Bolt, 25 Nm
14
To thermostat housing
15
Gasket
‹› Always replace.