Jetta Sedan L5-2.5L (BGP) (2005)
/Page-940005.png)
-
Remove the 3 coolant pump bolts and rotate the coolant pump - A - out as shown.
Installing
Installation is performed in the reverse order of removal. When doing this note the following:
‹› Note installation position of coolant pump. Sealing plug in housing points downward.
‹› Fill the cooling system. Refer to --> [ Draining and Filling ] See: Cooling System/Service and Repair/Cooling System, Draining and Filling.
‹› Install the battery.
Tightening Specifications
