Jetta Sedan L5-2.5L (BGP) (2005)
-
Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130 and oxygen sensor control after catalytic converter, checking
10. Connector, 4-pin
-
Brown
-
Installed location
11. 25 Nm
12. Suspended mount
-
Replace if damaged
Installed position of clamp
-
Arrow - points in direction of travel.
-
Align clamp - 1 - to the marking - 2 - on catalytic converter.
-
-a - = 5 mm
Bolts must not project beyond lower edge of clamp.
Connector for oxygen sensor - installed position
The connector is located to right, on vehicle floor under cover.
1. Bracket
2. Connector for Oxygen Sensor (O2S) Behind Three Way Catalytic Converter (TWC) G130