Jetta Sedan L5-2.5L (BGP) (2005)
-
Ensure bowden cable is routed under hook - arrow -.
-
Check whether temperature knob can be moved easily from "cold" to "warm".
Temperature Flap Adjustment Unit, Removing and Installing
Temperature Flap Adjustment Unit, Removing And Installing
Removing:
-
Remove driver side footwell trim.
-
Remove left footwell air vent
-
Unclip cable at adjusting unit for temperature flap - 2 -.
-
Disengage locking mechanism - 1 - and press adjusting unit for temperature flap in direction of - arrow - until it reaches stop.
-
Remove adjustment unit.
Installing
Install in reverse order of removal.
NOTE: After installing, check temperature flap function as follows: Temperature rotary control knob must be able to move easily and without catching
from "cold" to "warm" position.