Jetta Sedan L5-2.5L (BGP) (2005)
Discharge Air Temperature Sensor / Switch: Removal and Replacement
Left Footwell Vent Temperature Sensor G261, Removing and Installing
Left Footwell Vent Temperature Sensor G261, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
-
Remove instrument panel
-
Remove screws from bracket.
-
Disconnect electrical connection at sensor - 1 -.
-
Press bracket slightly toward left, rotate sensor - 1 - 90 degrees and remove from housing.
Installing:
Install in reverse order of removal.
Right Footwell Vent Temperature Sensor G262, Removing and Installing
Right Footwell Vent Temperature Sensor G262, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
NOTE: Right Footwell Vent Temperature Sensor G262 is depicted with instrument panel removed. It is not necessary to remove instrument
panel.
-
Remove glove compartment
-
Disconnect electrical connection at sensor - 1 -.