Jetta Sedan L5-2.5L (BGP) (2005)
Oil Filter: Removal and Replacement
Oil Filter Bracket with Attachments Overview
1
Bolt, 25 Nm
2
Oil filter bracket
‹› Removing:
-
Drain the cooling, refer to --> [ Draining and Filling ] See: Engine, Cooling and Exhaust/Cooling System/Service and Repair/Cooling System,
Draining and Filling.
-
Remove the intake manifold, refer to --> [ Intake Manifold ] See: Engine, Cooling and Exhaust/Engine/Intake Manifold/Service and
Repair/Removal and Replacement/Intake Manifold.
-
Remove the connection for the thermostat.
-
Disconnect the coolant hose from the thermostat housing.
-
Drain the oil filter housing. Refer to --> [ Oil Filter Housing, Draining ] See: Engine, Cooling and Exhaust/Engine/Engine Lubrication/Oil Filter
Housing/Service and Repair and remove.
-
Loosen the intake manifold support.
-
Remove the oil filter bracket, the vent hose- item 6 - remains connected.
3
Gasket
‹› Always replace.