Jetta Sedan L5-2.5L (BGP) (2005)
Wiring Harness: Service and Repair
Wiring Harnesses and Connectors, General Repair Measures
Wiring Harnesses And Connectors, General Repair Measures
CAUTION:
-
Note CAN-Bus wiring repair measures.
-
Soldering is not permitted.
-
Do not repair welded connections in the wiring harness. Fabricate and connect an appropriate overlay harness instead.
-
Wiring harness and connector repairs must only be performed using VAS 1978 Wiring Harness Repair Kit VAS 1978 Instruction Manual.
-
Only the yellow repair cables and insulation tape supplied with VAS 1978 are to be used for wiring/connector repairs. The use of yellow repair
wires and yellow insulation tape identifies that a repair has taken place VAS 1978 Instruction Manual.
-
All shielded wiring (E.g.: knock sensors, antenna etc.) are Not to be repaired. Replace complete wiring harnesses as necessary.