Jetta Sedan L5-2.5L (BGP) (2005)
Electronic Throttle Control Module: Service and Repair
Throttle Valve Control Module J338, Removing And Installing
Special tools, testers and auxiliary items required
-
Hose clamps up to 25 mm diameter 3094
Removing
NOTE: Observe the rules for cleanliness
-
Remove engine cover with air filter
-
Remove intake duct - 4 - between Throttle valve control module J338 and Mass Air Flow (MAF) sensor G70 by pulling off air hoses - 1 - if
present, and air duct - 2 - (compress securing ring) and removing spring-type clamp - 3 -.
-
Unscrew intake air connection at lock carrier - arrows -.