Jetta Sedan L5-2.5L (BGP) (2005)
/Page-1272001.png)
Fuel Level Sensor: Service and Repair
Fuel Level Sensor G, Removing And Installing
Removing
-
Remove fuel delivery unit
-
Release wiring connectors - 1 to 3 - and disconnect.
-
Lift retaining tabs - 4 - and - 5 - with a screwdriver and pull fuel level sensor out downward - arrow -.
Installing
-
Insert Fuel level sensor G into guides on fuel delivery unit and push up until it engages.
-
Connect connectors and check that they are securely engaged.
-
Install Fuel Pump (FP).
