Jetta Sedan L5-2.5L (BGP) (2005)
Fuel Gauge Sender: Service and Repair
Fuel Level Sensor
‹› Phased-in introduction of fuel delivery units with changed fuel level sensor.
--> [ Old Version ]
--> [ New Version ]
Old Version
Removing
-
Remove the fuel delivery unit. Refer to --> [ Fuel Delivery Unit ] See: Fuel Pump/Service and Repair/Fuel Delivery Unit.
-
Disconnect connectors - arrows - and remove the electrical wires - 1, 2 and 3 -.
-
Lift the retaining tabs - 4 - and - 5 - with a screwdriver and remove the fuel level sensor downward and off - arrow -.
Installing
-
Insert the fuel level sensor into guides on the fuel delivery unit and press up until engagement.
-
Connect the electrical connectors and check for secure locking.
-
Install the fuel delivery unit. Refer to --> [ Fuel Delivery Unit ] See: Fuel Pump/Service and Repair/Fuel Delivery Unit.
New Version
Removing
-
Remove the fuel delivery unit. Refer to --> [ Fuel Delivery Unit ] See: Fuel Pump/Service and Repair/Fuel Delivery Unit.
-
Release the retaining tabs - arrows - with a screwdriver.