Jetta Sedan L5-2.5L (BGP) (2005)
-
Cut the heads of shear bolts so that two parallel surfaces remain - arrows -.
-
Remove bolts with locking pliers.
-
Insert a screwdriver - A - between protective housing and retaining plate - arrow -.
-
Use screwdriver - A - to pry protective housing upward, and then pull if off sideways from retaining plate - arrow -.
-
Release and pull off front connector - 1 - from Motronic Engine Control Module (ECM) J220.
-
Pry retaining tab - 2 - slightly open.
-
Then, push Motronic Engine Control Module (ECM) J220 out of retainer - arrow -.
-
Release rear connector from Motronic Engine Control Module (ECM) J220 and pull it off.