Jetta Sedan L5-2.5L (BGP) (2005)
Control Module HVAC: Procedures
Heating And Ventilation Controls, Removing And Installing
Removing:
CAUTION:
-
Switch off all electrical consumers.
-
Switch ignition off and remove ignition key.
NOTE:
-
Heating and ventilation controls consist of two separable housings. Before removing controls, set rotary control knobs to the following positions.
-
Heater control to "cold"
-
Blower control to "0"
-
Air flow direction control to "footwell"
-
Remove radio
-
Remove long screws - 2 - and short screws - 3 - and remove controls - 1 - from center console.
-
Disengage electrical connection retainer - A - by pulling in direction or arrow - 1 -.
-
Disengage electrical connection retainer - B - to connector - arrow 2 - and Disconnect electrical connection - C -.
-
Disengage electrical connection retainer - D - and Disconnect electrical connection - D -.
Installing
Install in reverse order of removal, ensuring rotary control knobs have not been moved from the positions as specified for removal.