Jetta Sedan L5-2.5L (BGP) (2005)
2. Position "Drive"
3. Position "Start"
NOTE: For reasons of clarity, the following illustration depicts lock cylinder as removed and without ignition key.
-
Insert a steel wire (approx. 1.2 mm) into hole - arrow - next to ignition key.
-
Using steel wire - 2 -, release - arrow - the securing lever - 3 - of lock cylinder - 1 -.
-
Pull out lock cylinder - 1 - from steering lock housing.
Installing:
NOTE: In the following illustration, ignition key is not depicted for reasons of clarity.
-
Insert ignition key into lock cylinder - 1 - and turn it into position "Drive".
-
Using steel wire - 2 -, release - arrow - the securing lever - 3 - of lock cylinder - 1 -.
-
Insert lock cylinder - 1 - into steering lock housing.
NOTE: Electrical connection of induction coil for anti-theft immobilizer must be inserted into guide on steering lock housing.
-
Pull out steel wire - 2 - from lock cylinder - 1 - and check lock cylinder for secure seating in steering lock housing.
-
Reconnect electrical connection to induction coil for anti-theft immobilizer.
-
Install remaining components in reverse order of removal.