Jetta Sedan L5-2.5L (BGP) (2005)
-
Remove clamp for boots at left - 1 - and pull off boots from steering gear housing.
-
Turn steering into straight ahead position using T10304.
For this purpose, dimension - a - = 28 mm.
-
Remove gasket - 1 - from cover - 2 -.
-
Mark installation position of cover - 2 - to steering gear housing - arrow -.
-
Remove cover - 2 -, unscrew bolts - 3 - to do this.
Prevent contact with electrical components - arrow -!
-
Observe general repair notes.
CAUTION: During longer interruptions of work, cover the opened steering gear housing with e.g. foil to protect against moisture.
-
Mark routing of sensor wire on steering gear housing.
-
Unclip sensor wire on steering gear housing.