Jetta Sedan L5-2.5L (BGP) (2005)
7. Spindle (3346/2)
-
Install the bushing by turning the (3346).
‹› Do not use lubricant!
‹› Insert the bushing with care so it is not tilted.
-
Install the cover plate.
-
Install the wheel hub and bearing.
-
Bring the wheel bearing housing into curb weight position. refer to --> [ Wheel Bearing Housing, Lifting to Curb Weight Position ] See: Service
and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position.
Only tighten the bolts if dimension "a" has been reached. Refer to --> [ between the wheel hub center and the lower edge of the wheel
housing has been attained. ] See: Service and Repair/Rear Suspension/Wheel Bearing Housing, Lifting to Curb Weight Position!
-
Tighten the bolt - arrow - for the lower transverse link - 1 -.
-
Install the coil spring. Refer to --> [ Coil Spring ] See: Suspension Spring ( Coil / Leaf )/Service and Repair/Coil Spring.
-
Install the brake disc.
-
Install the brake carrier with caliper.
-
Install the wheel and tighten. Refer to --> [ Wheel Bolt Tightening Specification ] .
Tightening Specifications