Jetta Sedan L5-2.5L (BGP) (2005)
Spring pin is sheared off when pressing out.
-
Drive remaining part of roller pin out of differential housing.
Spring pin without surrounding groove (long spring pin), installing
-
Align the hole in the differential bevel gear axle to the hole in the differential housing.
-
Drive a new spring pin in to dimension - a - = 3.0 mm using a drift - 1 -.
‹› The spring pin must not come in contact with the transmission when the differential housing is installed.
On some transmissions the thrust washer union was made with a ridge - A - in the area of the holes.