Jetta Sedan L5-2.5L (BGP) (2005)
Wiper Arm: Procedures
Wiper Arms, Removing And Installing
Removing:
-
Remove wiper arms.
Installing:
NOTE: Wiper arm nuts must only be torqued after wiper blade park position is checked and adjusted.
-
Deactivate APP function
-
Operate wipers briefly, allow to run to park position and then switch off ignition.
-
Mount wiper arms to wiper shaft and loosely install nuts - arrows - (do not tighten).
-
Adjust wiper blade park position.
-
Reinstall covers and trim.