Jetta Sedan L5-2.5L (CBTA) (2009)
Trunk / Liftgate Handle: Service and Repair
Rear Lid, Sedan
Grip Piece
Removing
-
Remove rear lid trim.
-
Remove lock cylinder. Refer to --> [ Lock Cylinder ]. See: Service and Repair/Lock Cylinder
-
Disconnect connector - 5 -.
-
Unscrew nuts - 6 - and remove grip piece - 7 -.
Installing
Installation is performed in the reverse order of removal.
Tightening specification for hex nuts: 8 Nm
‹› Before the rear lid is closed, a function test of the unlocking components must be performed.