Jetta Sedan L5-2.5L (CBTA) (2009)
Luggage Rack: Service and Repair
Roof Rail
Roof Rail
--> [ Roof Molding ]
--> [ Side Panel Trim Molding, GLI ]
Roof Molding
Removing
-
Using the Trim Removal Wedge (T10039/1), pry the front and rear roof rail cover - 1 - in the - direction of the arrow -.
-
Pull up the front and rear roof rail cover - 1 - in - direction of arrow A - and press in - direction of arrow B -.
-
Remove the roof rail cover - 1 -.
-
Remove the bolt - 3 - on the front and rear roof rail mount - 2 - (20 Nm).
-
Remove the center cover - 1 - from the roof rail - 3 - in the - direction of the arrow -.