Jetta Sedan L5-2.5L (CBTA) (2009)
-
Seal the brake lines and threaded holes immediately using sealing plugs from sealing plug repair kit (1H0 698 311 A).
-
Mark the brake lines - 1 through 4 - for the brake calipers and remove and seal them.
-
Pull the hydraulic unit with control module upward in - direction of arrow -.
Removing the Control Module from Hydraulic Unit
-
Set the hydraulic unit with control module upward on a clean, level surface.
-
Remove the Torx bolts - arrows -.