Jetta Sedan L5-2.5L (CBTA) (2009)
-
Clamp the (VAS 6056/3) - 3 - in a drill and place it on the brake line.
-
Shear the coating from the brake line at a slow drill speed and with light pressure against the line.
‹› The length of the sheared off portion is determined by the stop in the shearing tool.
-
Remove the (VAS 6056/3) from the brake line and remove the shearing remains.
-
Remove the (VAS 6056/4) and tube fitting - D - from the brake line.
-
Slide the brake line - B - against the stop - A - on the flanging tool.