Jetta Sedan L5-2.5L (CBTA) (2009)
-
Turn around handle part - 2 - of torque wrench 180° and insert socket again.
-
Set turning direction of torque wrench to left at socket.
-
Insert a multi-point socket insert M10 - 1 - in generator shaft.
-
Counter hold (VAS 3400) using 17 mm open end wrench.
-
Tighten the free-wheeling ribbed belt pulley by turning the generator input shaft to the left using the (V.A.G 1332).
-
Tighten all fasteners to specified values. Refer to --> [ Generator Tightening Specifications ] See: Specifications/Mechanical
Specifications/Alternator/Generator Tightening Specifications.
Ribbed Belt Pulley with Freewheel, Valeo
Ribbed Belt Pulley with Freewheel, Valeo
Special tools, testers and auxiliary items required
‹› Multi-point adapter (VAS 3400)