Jetta Sedan L5-2.5L (CBTA) (2009)
-
Pull Multi-Function Transmission Range (TR) Switch - 4 -, together with washers - 2 - and - 3 -, off selector shaft - 6 -.
Installing
Install in reverse order of removal. During this step, observe the following:
-
Place Multi-Function Transmission Range (TR) Switch - 4 - on selector shaft - 6 -.
-
Tighten securing bolts - 5 - for Multi-Function Transmission Range (TR) Switch hand-tight.
-
Carefully bend back hooks of lock washer - 2 -.
-
Put washers - 2 - and - 3 - on selector shaft - 6 -.
-
Install washer - 2 - with hooks pointing up.
-
Install washer - 2 - with long, narrow guides in long, narrow recesses of selector shaft - 6 -.
-
Tighten nut - 1 - to 7 Nm.
-
Secure nut - 1 - by bending up hooks on lock washer - 2 -.
-
If hooks are broken off, replace lock washer.
-
Place lever - 3 - on selector shaft - 4 -.