Jetta Sedan L5-2.5L (CBTA) (2009)
-
Replace the bolts for the brackets using the (T10096) in succession and tighten to 20 Nm.
Securing the Bracket
Position of the front axle is now secured.
Remove the stabilizer bar. Refer to --> [ Stabilizer Bar ] See: Stabilizer Bar/Service and Repair/Front Suspension/Stabilizer Bar.
Remove the steering gear, refer to one of the following:
‹› Generation 2 steering gear, refer to --> [ Steering Gear, Generation 2 ] See: Steering/Steering Gear/Service and Repair/Removal and
Replacement/Steering Gear, Generation 2.
‹› Generation 3 steering gear, refer to --> [ Steering Gear, Generation 3 ] See: Steering/Steering Gear/Service and Repair/Removal and
Replacement/Steering Gear, Generation 3.
Removing Locating Pins (T10096)
Removal is performed in the reverse order. Make sure that the (T10096) are replaced in succession using new bolts.
Tightening Specifications