Jetta Sedan L5-2.5L (CBTA) (2009)
-
Remove the lower noise insulation.
-
Remove the bracket for the exhaust system from the subframe.
-
Remove the bolts - arrows - for the heat shield.
-
Remove the heat shield from the subframe.
-
Remove the pendulum support from transmission, remove bolts - 14 - to do so.
-
Secure the subframe. Refer to --> [ Subframe Locating ] See: Procedures/Subframe Locating.
-
Now remove the bolts for:
‹› The steering gear - 3 - and - 6 -
‹› The stabilizer bar - 11 - and - 16 -
‹› and the subframe - 4 -, - 5 -, - 12 - and - 15 -.