Jetta Sedan L5-2.5L (CBTA) (2009)
-
Place the trailing arm on a level surface so that dimension - A - = 114 mm.
-
Mark a vertical line onto the bushing of the trailing arm - arrows -.
Installation Position
There are 2 different bonded rubber bushings. For both, the marked line must lie between the raised points - 1 - after installing.
-
Position of the bonded rubber bushings.
‹› Always make sure that the bushings are in the correct installation position to the bushing of trailing arm.
-
Install the special tools as depicted in the illustration.