Jetta Sedan L5-2.5L (CBTA) (2009)
‹› Installation position --> [ Shift Mechanism Installation Position ] See: Procedures
7
Bushing
8
Shift cable
‹› Pry off of shift lever guide
‹› Press onto shift lever guide inside shift mechanism
‹› Installation position --> [ Shift Mechanism Installation Position ] See: Procedures
9
Damper
10
Bearing shell
‹› Is damaged during removal
‹› Always replace
11
Bushing
12
Lock washer
‹› Removing and installing --> [ Removing and installing lock washer ] See: Shift Lever and Shift Housing through 10.06, Servicing
13
Spring
‹› Removing and installing --> [ Removing and installing lock washer ] See: Shift Lever and Shift Housing through 10.06, Servicing
14
Bushing
15
Shift lever guide
16
M8 25 Nm hex head nut; M6 8 Nm hex head nut
‹› Quantity: 4
17
Gasket
‹› Between shift housing and floor
‹› Self-adhesive
‹› Adhere to shift housing
18
Shift housing
‹› With spring and selector bracket
‹› Spring and selector bracket cannot be removed
Shift Lever and Shift Housing through 10.06, Servicing
Shift Lever and Shift Housing through 10.06, Servicing
‹› Lubricate bearing areas and slide surfaces with grease (G 000 450 02).