Jetta Sedan V6-2.8L (BDF) (2003)
-
Press apart radio-frequency unit - 1 - using key bit of key - 2 -.
-
Use a screwdriver to unclip battery - 1 - out of holders - 2 - in direction of - arrow -.
Installing
Note polarity and installation position of battery when installing.
-
Place battery - 1 - in radio-frequency unit - 2 - with positive terminal downward (positive terminal is marked in housing).
-
Press on battery with light pressure to engage it in radio-frequency unit.
-
Reattach cover to radio-frequency unit (do not damage seal).
-
Then engage radio-frequency unit on key.