Jetta Sedan V6-2.8L (BDF) (2003)
-
Bleed brake system Mark 60
-
Servicing
5. Guide pins, 28 Nm (21 ft. lbs.)
6. Protective cap
-
Take off
7. Brake hose with banjo union and banjo bolt, 35 Nm (26 ft. lbs.)
8. Wheel bearing housing
9. Hex socket head bolt, 8 Nm (71 inch lbs.)
10. ABS speed sensor
-
Before inserting sensor, clean mounting hole inner surface and coat with lubricating paste G 000 650
11. Splash plate
12. Hex bolt, 10 Nm (89 inch lbs.)
13. Wheel bearing
-
Replace each time after removing
-
Pressing out and in
14. Circlip
15. Wheel hub with rotor
-
Pressing out and in
16. Brake pads
-
With wear indicator
-
Warning lamp lights up on instrument panel when wear limit is reached (limit: 2 to 3 mm; 0.0787 to 0.118 inch)
-
Thickness 14 mm (0.551 inch)
-
Checking thickness
-
Always Replace both sides
-
Removing and installing
-
Wear limit: 7 mm (0.276 inch) including back plate
17. Connector
-
Remove from bracket -item 18. when changing pads
18. Bracket
19. Bolt
Brake Pads, Removing and Installing
Brake pads, removing and installing
Special tools and equipment
-
VAG 1331 Torque wrench or equivalent
-
Piston resetting tool
Removing