Jetta Sedan V6-2.8L (BDF) (2003)
-
Locate lower part of brake caliper housing -arrow- first.
-
Install brake caliper housing with brake pads on wheel bearing housing.
The brake caliper housing lug -arrow- must be behind the wheel bearing housing guide.
-
Secure brake caliper housing to brake carrier with both guide pins and tighten to 28 Nm (21 ft. lbs.)
-
Insert brake wear indicator connector into bracket on suspension strut.
Note:
-
After each brake pad change firmly depress brake pedal several times with vehicle stationary, so that the brake pads are properly seated in their
normal operating position.
-
After changing brake pads check brake fluid level.
Front Brakes, Fn 3 Brake Caliper, Servicing
Front brakes, FN 3 brake caliper, servicing
Special tools and equipment