Jetta Sedan V6-2.8L (BDF) (2003)
^
Disposal
^
Special Information Suspension. Wheels Brakes Steering No. 2
^
Checking shock absorber for leaks and noises
21. Buffer stop
22. Protective sleeve
Suspension Strut Removal and Installation
Suspension strut, removing and installing
Removing
-
Remove wheel.
The following three steps are necessary only for vehicles with modified stabilizer bar mounting.
-
Unscrew upper hex nuts of connecting links from left and right suspension strut.
-
Pull out clamp on brake hose bracket and release brake hose.
-
Release speed sensor wiring from front suspension strut.
-
Remove securing bolts -2- from brake caliper.
-
Remove brake caliper and hang up on body. Do not hang from brake hose.
-
Remove coupling link from control arm.
-
Release speed sensor wiring from suspension strut.
Right-hand suspension strut
If right-hand suspension strut is to be removed then additional work is required
-
Remove noise insulation.
-
Disconnect axle shaft from transmission drive flange.
The following work sequence is valid for both sides