Jetta SportWagen L4-2.0L DSL Turbo (CBEA) (2009)
-
Remove coolant line bolts - arrows - from intake manifold and lay the line in front of the intake manifold.
-
Unclip wiring harness from wiring guide for the glow plugs.
CAUTION!
Always follow the correct procedure for disconnecting glow plug connectors!
-
Remove glow plug connectors. Refer to --> [ Glow Plug Connectors ] See: Powertrain Management/Glow Plug System/Glow Plug/Service and
Repair/Glow Plug Connectors.
-
Remove fuel return line bolt. Refer to --> [ item 3, 8 Nm ] See: Powertrain Management/Fuel Delivery and Air Induction/Service and
Repair/Removal and Replacement on the intake manifold.
-
Loosen hose clip - arrow - with the hose clip pliers (VAS 6362) and remove the line on the rail element (high pressure reservoir).
-
Before removing, clean return line connection on the fuel injectors (for example using a commercially available detergent).
-
Dry return line connections.
-
Cover return line connections with a rag.
-
Remove fuel return line connections on the fuel injectors. Pull them upward to release them - arrow -.