Jetta SportWagen L4-2.0L Turbo (CCTA) (2009)
-
Loosen four screws - 2 - in tunnel area 2-3 turns (20 Nm).
-
Loosen nut - 1 - on right side 2-3 turns (18 Nm).
-
Loosen fuse holder screw - 3 - on left side (2 Nm).
-
Loosen two nuts - 4 - 2-3 turns (18 Nm).
Instrument panel, aligning height
‹› Instrument panel height is set using eccentric screws - 2 - and - 5 -.
‹› In the zero position, the longer eccentric surface faces toward outside of vehicle.
‹› Eccentric must not be turned more than ±90° out of zero position.
-
Adjust desired instrument panel height using eccentric screws - 2 - and - 5 -.
Instrument panel, aligning width
-
Slide instrument panel into desired position.